Anti-Static Tubing for Powder Coating Operations

Flexible, durable and wear resistant, anti-static powder tubing conveys powder with consistent flow and uses material science to support perfect cleaning.

    This anti-static powder tubing provides a consistent and stable flow for your powder coating application due to its special interior surface properties that enable maximum output volume using only a minimum of air.

The tubing is available in four ID sizes and all contain an internal copper wire that provides a positive path to ground to eliminate hose pinholing caused by friction charging.

Powder coaters benefit from:

• Consistent powder flow.

• High quality and fast color change by compressed air purge.

• Less impact fusion and powder build up.

• Elimination of pinholing, less maintenance and repair down time.

• Tight radii arrangements without hose collapse or kinking.




anti-static tubing is used in applications such as :

• Conveying powder from the pump to the manual or automatic spray gun.

• Recycling powder from the spray booth to the Feed Center.

• Transporting bulk volumes of powder from the manufacturers carton / box or drum to a hopper or Feed Center.




• Four different hose internal diameters are available to suit your application:

• Low flow : 0.39' ID (10mm) - part number 768177

• Medium flow : 0.43' ID (11mm) - part number 768176

• High flow : 0.5' ID (12.7mm) - part number 768178

• Bulk transfer : 0.75' ID (19mm) - part number 106978