The main function of spray gun is to make the spray powder have a good atomization state and fully charged to ensure that the powder can be uniformly and efficiently adsorbed to the surface of workpiece.

Both tribo and corona powder coating have been commonly adopted for particle charging in the powder coating industry. Depending on the application, tribo or corona powder coating technologies are used for different powder coating productions.

Powder Coating spray gun contains high-voltage cascade could improve the safety performance and working efficiency, reduce powder consumption and save cost.

A common cause of orange peel in powder coating is how the powder coating is applied. Powder coatings have a suggested amount of powder that should be applied. In general if apply significantly more powder than the sheet recommends, this can potentially cause orange peel because the powder will not

Powder electrostatic spray gun as a necessary tool for electrostatic spraying, its performance directly determines the final spraying effect.