Home | Products | About Us | News | Contact Us
Art-texture polyester powder coating
polyester texture wrinkle powder coating
Hammer texture powder coating
The features of hammer texture powder coating:
Main composition
Mainly made of epoxy resin,polyester resin and curing agent, leveling agent, pigment, filler and other addictives. it has super chemical resistance and mechanical properties. It can be used in painting those metal products that have special requirement of corrosion resistance, electric insulativity and pliability. Directly outdoor using is not to be suggested.
Products series
Available in standard curing and lower temperature curing
Available in multi-colors, different gloss level such as high gloss ( above 90°), flat gloss( 70-80°), semi gloss ( 10-60°), matt( below 10°), particular color and gloss is made according to customers requirements.
Available in various kinds of art textures, such as sandy, wrinkle, lanose grain, hammer tone, metallic effect etc.
Physical property
Specific gravity: 1.11.8g/cm3 (varied with different color and gloss)
Particle size: average 10~38um, proportion 10~84um > 90%, it can be adjusted if special requirement is put forward to us in advance.
Curing temperature
Standard type: 180oC/15 minutes
Or 160oC/20 minutes, 200oC/10 minutes if customer require
Pre-treatment
The overall quality of the coating system is largely dependent on the type and quality of the pre-treatment. The recommended types of pre-treatment for the most frequently used substrates are:
Aluminium | Chromate conversion |
Steel | Zinc phosphate |
Zinc coated steel | Zinc phosphate or chromate conversion |
Coating method
Electrostatic spray gun
Tribo gun
Electrostatic fluidized bed
Fluidized bed
Average coating rate
A. Smooth Surface:
6-12/KG, film thickness 60μm (calculated according to 100 consuming of powder coating)
B. Texture Surface:
5-7/KG,film thickness is about 80-120μm
Package
Carton packing with liner of double polyethylene bags, Net weight 20kg each.
Storage and shippment
The product must be stored in ventilated, dry and clean room with temperature below 25oC, Keep it away from fire, heat,and direct sunlight. Outdoor stacking is prohibited. Avoid rains and exposure to sunshine during shipment. The period of validity is 6 month under above condition. Expired products can not be used unless re-testing result meets the utilization standards.
Health and safety
There are no hazardous ingredients contained. Wearing anti-dust mask and goggles to avoid inhalation of dust. Try best to avoid longtime contact with powder. The coating adhesive to the skin can be washed with soap.
Attention
This technical data is only for user reference,the concrete index is to measure under the terms of suring, in case of the problem can not be solved, please contact the technology department of our company.
Art-texture polyester powder coating
polyester texture wrinkle powder coating
Hammer texture powder coating
The features of hammer texture powder coating:
Main composition
Mainly made of epoxy resin,polyester resin and curing agent, leveling agent, pigment, filler and other addictives. it has super chemical resistance and mechanical properties. It can be used in painting those metal products that have special requirement of corrosion resistance, electric insulativity and pliability. Directly outdoor using is not to be suggested.
Products series
Available in standard curing and lower temperature curing
Available in multi-colors, different gloss level such as high gloss ( above 90°), flat gloss( 70-80°), semi gloss ( 10-60°), matt( below 10°), particular color and gloss is made according to customers requirements.
Available in various kinds of art textures, such as sandy, wrinkle, lanose grain, hammer tone, metallic effect etc.
Physical property
Specific gravity: 1.11.8g/cm3 (varied with different color and gloss)
Particle size: average 10~38um, proportion 10~84um > 90%, it can be adjusted if special requirement is put forward to us in advance.
Curing temperature
Standard type: 180oC/15 minutes
Or 160oC/20 minutes, 200oC/10 minutes if customer require
Pre-treatment
The overall quality of the coating system is largely dependent on the type and quality of the pre-treatment. The recommended types of pre-treatment for the most frequently used substrates are:
Aluminium | Chromate conversion |
Steel | Zinc phosphate |
Zinc coated steel | Zinc phosphate or chromate conversion |
Coating method
Electrostatic spray gun
Tribo gun
Electrostatic fluidized bed
Fluidized bed
Average coating rate
A. Smooth Surface:
6-12/KG, film thickness 60μm (calculated according to 100 consuming of powder coating)
B. Texture Surface:
5-7/KG,film thickness is about 80-120μm
Package
Carton packing with liner of double polyethylene bags, Net weight 20kg each.
Storage and shippment
The product must be stored in ventilated, dry and clean room with temperature below 25oC, Keep it away from fire, heat,and direct sunlight. Outdoor stacking is prohibited. Avoid rains and exposure to sunshine during shipment. The period of validity is 6 month under above condition. Expired products can not be used unless re-testing result meets the utilization standards.
Health and safety
There are no hazardous ingredients contained. Wearing anti-dust mask and goggles to avoid inhalation of dust. Try best to avoid longtime contact with powder. The coating adhesive to the skin can be washed with soap.
Attention
This technical data is only for user reference,the concrete index is to measure under the terms of suring, in case of the problem can not be solved, please contact the technology department of our company.
Aluminium
Chromate conversion
Steel
Zinc phosphate
Zinc coated steel
Zinc phosphate or chromate conversion
Aluminium
Chromate conversion
Steel
Zinc phosphate
Zinc coated steel
Zinc phosphate or chromate conversion